Productos

A slim-frame hinged door built to sit inside a slimline glazed wall without breaking the rhythm of the mullions. Multi-point locking, flush thresholds available on request.

A flush frame-to-sash design that removes the step you normally see between frame and leaf, so the unit sits quietly in a contemporary elevation. Concealed hinges carry the weight without a visible knuckle. Figures shown are for the fixed lite; operable-lite ratings are listed in the specification table.

An outward-opening casement on the slimline platform. Because the sash swings out, nothing intrudes on the room, and the narrow frame keeps the opening reading as glass. A practical pairing with fixed slimline units in long window runs.

A lift & slide door on a concealed track, engineered so the running gear is hidden in the floor and head. Handle down lifts the panel for near-frictionless travel; handle up drops it onto its seals. Roller assemblies are serviceable without removing the panel.

An all-aluminum corner unit with no vertical post at the junction, on the narrow-frame 80 platform. Fixed or with an operable leaf on one side; used to open a corner room to two aspects at once.

The heavy-duty aluminum lift & slide, for panels beyond the size and weight range of the standard system. Reinforced interlocks and upgraded carriages keep operation smooth at maximum leaf size.

A residential-scale window wall with minimal mullion faces, for full-height glazed elevations. Fixed lites, vents and door leaves share the same sightline, so a whole elevation can be drawn as one system rather than assembled from separate products.

A multi-track sliding wall: several large panels stack or pocket away so the opening clears almost completely. Track configurations are drawn to your plan, including pocketing into the adjacent wall where the framing allows.

A folding door that concertinas its panels to one or both sides, clearing the opening almost entirely. Top-hung running gear carries the weight so the floor track stays low, and EPDM weather seals with a thermally broken frame keep the closed position tight.

A made-to-drawing aluminum entry door. Panel layout, machining, glazing apertures and hardware positions are set from your elevation, so the front door can be detailed as a designed element rather than chosen from a stock range.

A pivot-hung entry door: the leaf turns on a floor and head spindle set in from the jamb, which is what allows a very large, very heavy door to swing with a light push. Insulated core, machined aluminum faces, and oversized heights available for double-height entries.

Two glass planes meeting at a corner with no post between them. Built on the wood-clad E80 platform, it turns a building corner into an uninterrupted view — the structural work moves into the head and sill so the sightline stays clean. Suited to primary living spaces and stair landings where the corner is the feature.

The narrow-frame version of our wood-clad tilt & turn: a sash that sits flush to the exterior and a shallower jamb, which makes it a straightforward choice for frame-in-frame replacement where the existing opening cannot grow. Taller units are available than on the standard frame, so you keep glass area without widening the rough opening.

A crank-operated casement built on our deepest wood-clad platform. The interior is real wood in your choice of species and finish; the exterior carries an AAMA-verified powder-coat cladding warranted against chalking and fading for 20 years. Duplex glazing bars are available to read as true divided panes from both sides.

A dual-action window with a solid wood interior and an extruded aluminum exterior. Tilt the sash in for secure background ventilation, or turn it fully in for cleaning and egress-width airflow. Concealed multi-point hardware keeps the operation light even at the top of the size range, and the warm interior face is finished to match your millwork.

A hinged terrace door that matches the wood-clad window platform pane-for-pane, so a door in a window run reads as part of the same composition. Multi-point locking, an aluminum weather face outside and a wood face inside.

A heavy-duty lift & slide door for large wood-clad openings. Turning the handle lifts the panel clear of its seals onto the carriage, so a very large, very heavy leaf moves with one hand; dropping it back compresses the weather seals for a tight close. For rooms where the opening is the architecture.

A solid timber entry door, built up in a stable engineered core and faced in your chosen species so the grain reads as one piece across the leaf. For traditional and transitional elevations where the entrance is expected to feel like joinery, not extrusion.

Our minimum-sightline tilt & turn platform, in two structural depths. F0 is the shallowest section we offer: the frame is designed to disappear into the surrounding construction, leaving glass as the visible material while retaining the two-position European operation — specified where the drawing calls for wall-to-wall glazing and the window is meant to read as a plane, not a frame. F37 carries a slightly deeper structural section, which buys additional height and width before a mullion is required, for larger single units on the same platform. Both share the same concealed hardware and two-position operation; pick the depth your span and sightline call for.